Xerox WorkCentre 5945 User'S Manual And Warranty Download Page 712

Page: 712 / 722

General Care and Troubleshooting

WorkCentre

5945/5955

710

User Guide

Clear Tray 4

1. Open tray 4.

2. If required, lift the handle to open the transport cover.

3. Remove any misfed pages.

4. If the paper keeps jamming open a new pack and load fresh paper, or if the paper is still

relatively new refresh the existing stack.

•

Fan the media to ensure no pages are stuck together.

•

Remove the top few sheets from the stack.

•

Flip the paper over in the paper tray.

5. If required, close the transport cover.

6. Close tray 4.

Clear Left Side Door then Clear Tray 4

1. Lift the handle to open the door on the left side of the device. Gently lower the door until it

comes to rest.

2. Remove any jammed pages that are sticking out from the device. Pages may be jammed at the

top, middle and bottom of the device.

Note:

For single sided jobs any jammed paper will be sticking out from the device engine, not

from the door. The paper may be jammed at the top, middle and bottom of the device. For 2-
sided jobs the paper may also be jammed in the door.

3. Lift the door on the left side of the device and gently push it towards the device until you hear

it click into place.

4. Open tray 4.

5. If required, lift the handle to open the transport cover.

6. Remove any misfed pages.

7. If required, close the transport cover.

8. Close tray 4.

More Information

Identifying the Parts of Your Device
Clearing Jams in Tray 1 (4 Tray Device)
Clearing Jams in Tray 2 (4 Tray Device)
Clearing Jams in Tray 3 (4 Tray Device)
Repeated paper jams, misfeeds or multi sheet feeds

Summary of Contents for WorkCentre 5945


















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WorkCentre 5945

Reviews:

Related manuals for WorkCentre 5945

Brands by name

Popular brands

Xerox WorkCentre 5945, User'S Manual And Warranty

Search results

Summary of Contents for WorkCentre 5945

Reviews:

Related manuals for WorkCentre 5945

Brands by name

Popular brands