Xerox WorkCentre 5945 User'S Manual And Warranty Download Page 684

Page: 684 / 722

General Care and Troubleshooting

WorkCentre

5945/5955

682

User Guide

Staple Cartridges and Hole Punch Waste

Staple Cartridges

Replacing the Staple Cartridge in the Office Finisher

The device displays the status code 12-714-01.

The message on the device touch screen reads:

Replace Staple Cartridge (R7)

This finisher and some of its’ components are optional and may not be fitted to your device.

1. Open the finisher front door.

2. Locate the staple cartridge unit.

3. If required, turn the staple head movement wheel fully clockwise. This will rotate the staple unit

slightly and may make it easier for you to access.

4. Grasp the cartridge by the orange handle and pull it out of the device.

5. Check you have removed the paper tab from the new staple cartridge.

6. Insert the new cartridge by pushing it straight into the device until it clicks into place.

Note:

For more detailed instructions see the device touch screen or the instructions provided

with the new staples.

7. Close the finisher door.

More Information

Replacing the Staple Cartridges in the New Office Finisher Booklet Maker
Replacing the Staple Cartridge in the Convenience Stapler

Replacing the Staple Cartridges in the New Office Finisher Booklet Maker

The device displays the status code 12-644-03 or 12-714-03.

If the message on the device touch screen reads:

Replace Staple Cartridge (R7)

replace the main

cartridge.

If the message on the device touch screen reads:

Replace Booklet Maker Staple Cartridges (R8)

replace the booklet maker cartridges.

This finisher and some of its’ components are optional and may not be fitted to your device.

Main Cartridge

1. Open the finisher front door.

2. Locate the staple cartridge. This is towards the top of the finisher to the right of handle 5b.

3. If required, turn the staple head movement wheel fully clockwise. This will rotate the staple unit

slightly and may make it easier for you to access.

4. Grasp the cartridge by the orange handle and pull it out of the device.

5. Check you have removed the paper tab from the new staple cartridge.

6. Insert the new cartridge by pushing it straight into the device until it clicks into place.

Summary of Contents for WorkCentre 5945


















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WorkCentre 5945

Reviews:

Related manuals for WorkCentre 5945

Brands by name

Popular brands

Xerox WorkCentre 5945, User'S Manual And Warranty

Search results

Summary of Contents for WorkCentre 5945

Reviews:

Related manuals for WorkCentre 5945

Brands by name

Popular brands