Xerox WorkCentre 5945 User'S Manual And Warranty Download Page 656 | Manualshive

Page: 656 / 722

background image

Paper and Media

WorkCentre

®

5945/5955

654

User Guide

Only use the types of media specified for use in the tray.

•

Plain

•

Bond

•

Recycled

•

Carbonless

•

Punched

•

Letterhead and Pre-printed

•

Cardstock

•

Up to 200 gsm (53 lb).

•

Labels

•

Transparencies (paper backed and non paper backed)

•

Envelopes

Note:

Labels can only be printed 1-sided.

1. Make sure the tray is in the down position. For larger media, use the tray extension.

2. Place the media in the tray. Media must be positioned against the right side of the tray.

Paper must not be loaded above the maximum fill line.

3. Place the media in the tray.

•

Media must be positioned in the center of the tray against both the left and right side
guides.

•

Paper must not be loaded above the maximum fill line.
-

Load LEF pre-printed paper face-up and with the top towards the front of the device.

-

Load SEF pre-printed paper face-up and with the top towards the main body of the
device.

-

Load LEF and SEF labels face-down.

-

Load LEF hole punched paper with the holes towards the main body of the device if
the holes are along the longest edge of the paper. If the holes are along the shortest
edge of the paper load it with the holes towards the back of the device.

-

Load SEF hole punched paper with the holes towards the top of the device if the holes
are along the longest edge of the paper. If the holes are along the shortest edge of the
paper load it with the holes towards the main body of the device.

-

Load transparencies face-down.
-

If the transparencies have a white strip load them with the white strip on the right.

-

Load SEF envelopes face down with flap closed. If the top edge of the envelope is the
longest edge load it with the top edge towards the back of the device. If the top edge
is the shortest edge, load it with the top edge towards the main body of the device.

4. Make sure that the paper guides just touch the paper.

The tray detects the position of the side guides to determine the size of the media.

5. The paper tray settings will be displayed on the screen. If the settings are correct select the

Confirm

button. If the settings are not correct change the settings as required.

«
...
654
655
656
657
658
...
»

Summary of Contents for WorkCentre 5945



















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WorkCentre 5945

Brand: Oki Pages: 6

Brand: Oki Pages: 44

Brand: Oki Pages: 13

Brand: Oki Pages: 20

Brand: Oki Pages: 2

Brand: Oki Pages: 28

Brand: Labau Pages: 19

Brand: Oki Pages: 17

Brand: Oki Pages: 12

Brand: Oki Pages: 30

Brand: Oki Pages: 391

Brand: Oki Pages: 2

NANOCOLOR UV/VIS II

Brand: Macherey-Nagel Pages: 6

Brand: BIXOLON Pages: 59

Brand: OmniPrint Pages: 44

275C - SRP Two-color Dot-matrix Printer

Brand: BIXOLON Pages: 100

LaserPro StellarMark IFII Series

Brand: GCC Technologies Pages: 111

Brand: Riso Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands