9^cdQ\\Y^WdXU=UTGU\T$
=UTGU\T$ ?`UbQd_bµc7eYTU
=_TYVYUT*'") #
"!)
= #"!!&@b_WbQ]cD ## D "# Q^TD "$
0DSSLQJ,QSXWV
To change the mapping of input points to input names, press the
2
key
while in the
IO Mapping
screen. This screen appears:
This example is for reference only. What you see will vary, depending
on your application and the input mapping currently entered.
Follow these steps:
1. Using the
W
or
E
keys as needed, scroll to the desired input
position number. For example, Input 09 might now have the
PRESSURE SWITCH input, but you want to assign the STEPPER
RESET GROUP 1 input to this input position number. The screen
would look like this:
2. With the cursor at Input 09, press
O
or
U
as needed to scroll
through the list of available input names. This screen appears:
88D" 3?==?>
CD1BD?69?=1@
9>@ED !*29>1BIC5<53D!@9<?D!
9>@ED "*29>1BIC5<53D"@9<?D"
gSe T_g^\_QTUhYd
6!6"6#6$
88D" 3?==?>
9>@ED (*61E<DB5C5D
9>@ED )*@B5CCEB5CG9D38
9>@ED! *>?>5
gSe T_g^\_QTUhYd
6!6"6#6$
88D" 3?==?>
9>@ED )*@B5CCEB5CG9D38
gSe T_g^\_QTUhYd
6!6"6#6$
