Wilo Yonos GIGA2.0-D, Installation And Operating Instructions Manual

Page: 190 / 424

en Reset
190 WILO SE 2022-05
Measured values
Operating data
Statistical data
Fig. 94: Measured values menu
Universal Display text
2.0 Diagnostics and measured values
2.2 Measured values
2.2.1 Operating data
H act = H is =
n act = n is =
P electr = P electr =
U mains = U mains =
2.2.2 Statistical data
W electr = W electr =
Operating hours = Operating hours =
The following information is displayed in the “Operating data” submenu:
Operating data
H is = 0.0 m
n is = 3800 /Min
P electr = 6 W
U mains = 0 V
Fig. 95: Operating data
Statistical data
W electr = 0 kWh
Operating hours = 8 h
Fig. 96: Statistical data
ƒ
Hydraulic operating data
–
Current delivery head
–
Current speed
ƒ
Electrical operating data
–
Current electrical power consumption
–
Current power supply on mains side
ƒ
Statistical data
–
Total consumed electrical power
–
Operating hours
16 Reset
The pump can be reset to the factory setting in the menu . To do this, select the
following:
Factory setting
Back to factory settings
Fig. 97: Resetting to factory setting
Universal Display text
3.0 Factory setting
3.1 Reset to
factory setting
Confirm Confirm
(settings will be lost!)
CANCEL Cancel