Wilo Yonos GIGA2.0-D, Installation And Operating Instructions Manual

Page: 116 / 424

en Description of the pump
116 WILO SE 2022-05
No. Component
36a Retaining ring
36b Retaining ring
Table 1: Arrangement of the main components
Fig. 1: Pump overview
Item Name Explanation
1 Transport lugs Used for transporting and lifting the components. See
“Installation” [
} 122] section.
2 Pump housing Install according to “Installation” [ } 122] section.
3 Motor Drive unit. Forms the drive together with the electronic
module.
4 Graphic display Provides information about settings and pump status.
User interface for setting the pump.
5 Electronic module Electronic unit with graphic display.
6 Electrical fan Cools down the electronic module (depending on type).
7 Protective plate in
front of lantern
window Protects against rotating motor shaft (DN 100, DN 125
only).
8 Wilo-Connectivity
Interface Optional interface
9 Differential pres-
sure sensor 2 ... 10 V with capillary tube connections on flanges of
suction and discharge side
Table 2: Description of the pump
ƒ
Item 3: The motor with mounted electronic module can be rotated relative to the
lantern. Observe the instructions in the “Permitted installation positions and
change of the arrangement of components before installation” [
}
124] section.
ƒ
Item 4: The display can be rotated in 90° steps as required. (See “Turning the dis-
play [
} 143]” section).
ƒ
Item 6: An unobstructed and free air flow must be ensured around the electric fan.
(see “Installation” [
}
122] section).
ƒ
Item 7: The protective plate must be dismantled for the leakage check (DN 100,
DN 125 only). Observe the safety instructions in “Commissioning” [
} 145] section!
Rating plates (Fig. 2)
2
1
Fig. 2: Rating plates
1 Pump rating plate 2 Drive rating plate
ƒ
There is a serial number on the pump rating plate. It must be specified e.g. for or-
dering spare parts.
ƒ
The drive rating plate is located on the side of the electronic module. The electrical
connection must be designed according to the specifications on the drive rating
plate.