Wilo Yonos GIGA2.0-D, Installation And Operating Instructions Manual

Page: 150 / 424

en Commissioning
150 WILO SE 2022-05
Fig. 33: Home screen
Item Name Explanation
1 Main menu over-
view Selection of different main menus
1.1 Status area:
Error, warning or
process informa-
tion display Indicates an on-going process, warning or error message.
Blue: Process or communication status display (CIF mod-
ule communication)
Yellow: Warning
Red: Fault
Grey: There are no processes running in the background,
there are no warning or error messages.
2 Title bar Display of the currently set control mode.
3 Setpoint display
field Displays currently configured setpoints.
4 Setpoint editor Yellow frame: You have pressed the operating button to
open the setpoint editor and change the value.
5 Active influences Display of influences on set control mode,
E.g. EXT. OFF. Up to four active influences can be dis-
played.
If a twin-head pump connection is set up, the status of
the twin-head pump is displayed here.
6 Operating data and
measurement area Shows current operating data and measured values. The
displayed operating data depend on the set control
mode. They are displayed alternately.
Table 17: Home screen
Setpoints can be changed in the “Home screen” menu.
Δp-v
Q is = 70.8 m³/h
Setpoint
Fig. 34: Home screen setpoint adjustment Δp-
v
Pressing the operating button activates the setpoint adjustment. The frame of the
changeable setpoint turns yellow.
The setpoint is changed by turning the operating button right or left.
Pressing the operating button again confirms the changed setpoint. The pump accepts
the value and the display returns to the main menu.
Pressing the back button without confirming the changed setpoint will not change
the setpoint. The pump shows the main menu with unchanged setpoint.
Active influences of the pump status on the display in the home screen for single
pumps
The active influences are listed from highest to lowest priority: