background image

INFINA® 2 AC LED FLEXIBLE LINEAR

DRIVERLESS RGBW LED STRIP

DL-AC-FLEX2-RGBW

Project

Fixture Type

Notes

 

  

 

 

 

NY

CA

15 Harbor Park Drive

Port Washington, NY 11050

© 2023 JESCO LIGHTING GROUP, LLC

OF

Specifications subject to change without notice

JW 01/16/2023

800 527 7796

855 265 5768

800 527 7796

855 265 5768

[email protected]

Tech Support   

855 592 0029

219 South 6th Ave

City of Industry, CA 91746

7

1

Main

Fax

Main

Fax

Please read and save these instructions. Read carefully before using product.  Protect yourself and others by observing all 

safety information, warnings and cautions.  Failure to comply with instructions could result in personal injury and/or damage 

to product or property.   Please retain instruction sheet for future reference.

DO NOT CUT OR SHORTEN INFINA

®

. DOING SO CAN CAUSE RISK OF ELECTRICAL SHOCK.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

IMPORTANT SAFETY INFORMATION

SAVE THESE INSTRUCTIONS

All electrical connections must be in accordance with local codes, ordinances and the National Electric Code.  This product 

operates on 

120 VAC

; always confirm the maximum wattage of the linear strip does not exceed the maximum wattage of 

the circuit it is connected to. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified 

licensed electrician.

• Do not cover this product as the covering may cause the flexible light to overheat and melt or ignite. 

• Do not operate with the flexible light while attached to plastic spool or tightly coiled. Excess heat may melt the spool 

   and/or strip light. 

• Do not puncture, cut, shorten, or splice the flexible lighting.

• Do not route the cord or flexible lighting cable through walls, doors, windows or any like part of the building structure.

• Do not use if there is any damage to the light or cord insulation. Inspect periodically.

• Do not submerge flexible light in liquids, or use the product in the vicinity of standing water or other liquids.

• Do not install near areas with exposure to salt water or chlorinated water.

• Secure this flexible light using only hangers or clips provided. Do not secure this product with staples, nails, or like  

   means that may damage the insulation or permanently attach to the building structure.

• Do not subject flexible lighting to continuous flexing.

• Do not install in cabinets, tanks or enclosures of any kind.

• Do not install closer than 3 meters from a swimming pool surface.

• Do not install in environment where LED chips are exposed to direct sunlight as damage to the phosphor will occur. 

• DO NOT EXCEED THE MAXIMUM NUMBER OF EXTENSIONS OR FLEXIBLE LIGHT LENGTHS PERMITTED BY THE MARKING.

WARNING

: When using outdoor-use portable lighting products, basic safety precautions should always be

followed to reduce the risk of fire, electric shock, and personal injury, including the following:

Read All Instructions

a) Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet to be used for the

outdoor use flexible lighting product. Receptacles are available having built-in GFCI protection for this measure of

safety.

b) Use only outdoor extension cords, such as type SW, SOW, STW, STOW, SJW, SJOW, SJTW, or SJTOW.

This designation is marked on the wire of the extension cord.

c) Caution: Do not install closer than 3 meters from a swimming pool surface.

ALL PICTURES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLY, ACTUAL PRODUCT MAY VARY

RATED 120 VOLT AC to LC-AC-600-INT

DL-AC-FLEX2-RGBW |3Watt/Foot | MAX 164 Feet

Note: Each 5 feet of connecting cable is equvalent to 1 linear foot of INFINA

®

 

linear strip

WARNING: RISK OF FIRE AND SHOCK

Summary of Contents for INFINA DL-AC-FLEX2-RGBW








Reviews: