INFINA® 2 AC LED FLEXIBLE LINEAR
DRIVERLESS RGBW LED STRIP
DL-AC-FLEX2-RGBW
Project
Fixture Type
Notes
NY
CA
15 Harbor Park Drive
Port Washington, NY 11050
© 2023 JESCO LIGHTING GROUP, LLC
OF
Specifications subject to change without notice
JW 01/16/2023
800 527 7796
855 265 5768
800 527 7796
855 265 5768
Tech Support
855 592 0029
219 South 6th Ave
City of Industry, CA 91746
7
4
Main
Fax
Main
Fax
DL-AC-FLEX2-RGBW-HW(08/20)
120V AC
UL LISTED OUTDOOR
JUNCTION BOX
(not included)
DMX OUTPUT CABLE
DMX CABLE
DMX CABLE
Diagram 1.1
UL LISTED OUTDOOR
SPLICE BOX
(not included)
Nut
Strain Relief Bushing
LC-AC-600-INT
DL-AC-FLEX2-RGBW
LC-CC-120
OPTIONAL
LC-PC-600
1. Connect 120V AC supply wire to LC-PC-600 and LC-AC-600-INT’s input wires in an UL listed outdoor junction box.
BLACK to BLACK, WHITE to WHITE. Secure all connections via outdoor wire nuts. Install weatherproof lid per
manufacturer’s instructions without pinching wires.
For indoor applications, indoor junction box may be used.
LC-PC-600 and LC-AC-600-INT can be wired to 120V AC in separate circuit.
2. Connect LC-PC-600’s DMX output cable with bar rel connector to LC-AC-600-INT DMX’s cable with bar rel connector.
Secure connection by tightening lock nut on bar rel connector. Additional LC-AC-600-INT can be daisy chain with
the DMX cable with bar rel connector for DMX signal.
3. Connect DL-AC-FLEX2-RGBW-HW20 cable to LC-AC-600-INT in an UL listed outdoor splice box. Follow diagram 1.1 for
cor rect color wires connection. Install included strain relief bushing on DL-AC-FLEX2-RGBW-HW20 cable and onto
splice box. Install weatherproof lid per manufacturer’s instructions without pinching wires.
For indoor applications, indoor splice box may be used.
Rigid and flexible conduit may be used to protect any exposed cables in accordance with local codes, ordinances
and the National Electric Code
TEMP RANGE:-20 -+50
SEC:
Uin=100-240AC
Iin=15mA MAX
AC 100-240V
INPUT
AC INPUT
Black :N
White :L
AC DMX512&RDM Controller
LC-PC-600
IP67
XLR Mini
Connector
1: DMX-
2: DMX+
3: COMMON
Reset
Key
Learning
Key
1
3
2
INSTALLATIONS WITH LC-PC-600
TURN OFF ELECTRICITY
at main fuse box (or circuit breaker
box) before beginning installation
by switching circuit breaker off or
removing fuse.
MIN 90º C SUPPLY CONDUCTORS.
HARDWARE FOR INSTALLATION
(NOT INCLUDED)
HARDWARE
(INCLUDED)
UL LISTED OUTDOOR
JUNCTION BOX
& SPLICE BOX
STRAIN RELIEF
BUSHINGS FOR SPLICE
BOX TO J-BOX
1x SJT CORD
STRAIN RELIEF BUSHING
WATERPROOF
WIRE NUTS
RATED 120VOLT AC
All electrical connections must be in accordance with local codes, ordinances and the National Electric Code
CONSULT A QUALIFIED
ELECTRICIAN TO ENSURE CORRECT
BRANCH CIRCUIT
