Wilo Yonos GIGA2.0-D, Installation And Operating Instructions Manual

Page: 181 / 424

Display settings en
Installation and operating instructions Wilo-Yonos GIGA2.0-I/-D 181
Twin-head pump example:
ƒ
Pump head left (l)
–
Wilo Net termination: ON
–
Wilo Net address: 1
ƒ
Pump head right (II)
–
Wilo Net termination: ON
–
Wilo Net address: 2
12.7 Application and function of CIF
module
Depending on the type of CIF module inserted, a “Settings”, “External interfaces”
associated settings menu is displayed in the menu.
The required settings of the CIF modules in the pump are described in the user manual
of the CIF modules.
13 Display settings
General settings can be changed under “Settings”, “Display Settings”.
The following table gives an overview of the “Display settings” menu:
Display settings
Brightness
Language
Units
Fig. 81: Display settings menu
Universal Display text
1.0 Settings
1.5 Display settings
1.5.1 Brightness
1.5.2 Language
English English
Deutsch German
Français French
Universal Universal
1.5.3 Units
m, m³/h m, m
3
/h
kPa, m³/h kPa, m
3
/h
kPa, l/s kPa, l/s
ft, USGPM ft, USGPM
1.5.4 Key lock
1.5.4.1 Key lock ON
13.1 Display brightness
The display brightness can be changed under “Settings”, “Display settings”. The
level of brightness is shown in a percentage. 100 % brightness corresponds to maxi-
mum possible, 5 % is the minimum possible brightness.
Universal Display text
1.0 Settings
1.5 Display settings
1.5.1 Brightness
13.2 Language
The language can be set under “Settings”, “Display settings”.
The following languages can be selected:
Language abbreviations Language
EN English
DE German
FR French
IT Italian
ES Spanish
UNIV Universal