Wilo Yonos GIGA2.0-D, Installation And Operating Instructions Manual

Page: 148 / 424

en Commissioning
148 WILO SE 2022-05
Control settings
Control mode
Setpoint Δp-v
Emergency operation
Control mode
Δp-v
Δp-c
n-c
ƒ
Turn : menu selection and parameter setting.
ƒ
Press : Activation of menus or confirming settings.
Press the “Back” button (“Description of operating elements” [ } 147] table) to
change the focus back to the previous focus. Consequently, the focus moves one level
further up in the structure or to a previous setting.
Pressing the Back button after having changed a setting (yellow focus) without
confirming the changed value returns the focus to the previous focus. The adjusted
value will be discarded. The previous value remains unchanged.
If the Back button
is pressed for more than 2 seconds, the Home screen opens and
the pump can be operated from the main menu.
NOTICE
If there are no warning or error messages, the display on the electronic module will
switch off 2 minutes after the last time it was operated.
• If the operating button is pressed or turned again within 7 minutes, the previously
exited menu will appear. You can continue to configure settings.
• If the operating button is not pressed or turned for more than 7 minutes, any un-
confirmed settings will be lost. Pressing the button again opens the Home screen on
the display and the pump can be operated from the main menu.
9.4.3 Initial settings menu
The settings menu will appear in the display during initial commissioning of the pump.
Language
EN
DE
FR
Fig. 30: Initial settings menu
Language
UNIV
FI
SV
Fig. 31: Menu language
Turn the operating button to display the different menu languages. The following lan-
guages can be selected:
Language abbreviations Language
EN English
DE German
FR French
IT Italian
ES Spanish
UNIV Universal
FI Finnish
SV Swedish
PT Portuguese
NO Norwegian
NL Dutch
DA Danish
PL Polish
HU Hungarian
CS Czech
RO Romanian
SL Slovenian
HR Croatian