Wilo Yonos GIGA2.0-D, Installation And Operating Instructions Manual

Page: 151 / 424

Commissioning en
Installation and operating instructions Wilo-Yonos GIGA2.0-I/-D 151
Name Displayed
symbols Description
Fault Error active, motor stops
Pump kick Pump kick active
EXT.OFF Digital input DI EXT. OFF active
Pump operation OFF Pump manually switched off
Setpoint OFF Analogue signal OFF
Substitute speed Pump is running at substitute
speed
Fallback Off Replacement mode active, but
set to motor stop
No active influences No active influences active
Table 18: Active influences
Active influences on the hydraulic output - displayed in the home screen
Name Dis-
played
sym-
bols Description
Limitation of the hydraulic out-
put Limitation of hydraulic output due to ex-
ternal influences such as too high tem-
perature or insufficient power supply.
No active influences
-
No active influences on the volume flow.
Table 19: Active influences
9.4.6 Submenu
Each submenu is made up of a list of submenu items.
The title identifies a subsequent submenu or settings dialogue.
9.4.7 Main menu “Settings” - Menu
overview
The following table gives an overview of the “Settings” main menu:
Universal Display text
1.0 Settings
1.1 Control settings
1.1.1 Control mode
Δp-v ∆p-v
Δp-c ∆p-c
n-c n-c
PID control PID controller
1.1.2
1
1.1.2 Δp-v,
1.1.2 Δp-c,
1.1.2 n-c,
1.1.2 PID
Setpoint
1
Δp-v
Δp-c
n-c
PID control
1.1.2 Δp-v Setpoint ∆p-v
H set = H target =
1.1.2 Δp-c Setpoint Δp-c
H set = H target =
1.1.2 n-c Setpoint n-c
n act = n is =
1.1.2 PID Setpoint PID