Wilo Yonos GIGA2.0-D, Installation And Operating Instructions Manual

Page: 174 / 424

en Communication interfaces: Setting and function
174 WILO SE 2022-05
Set control mode Function of analogue in-
put AI1 Function of analogue in-
put AI2
Δp-c Configured as actual value
input
ƒ
Usage type: Differen-
tial pressure sensor
Configurable:
ƒ
Signal type
ƒ
Sensor measurement
range
ƒ
Sensor position
Not configured
Can be used as a setpoint
input
n-c Not used Not configured
Can be used as a setpoint
input
PID Configured as actual value
input
ƒ
Type of use: any
Configurable:
ƒ
Signal type
Not configured
Can be used as a setpoint
input
Table 29: Application and function of analogue inputs
To change the settings of the analogue inputs, select the following in the menu:
Universal Display text
1.0 Settings
1.3 External interfaces
1.3.3 Analogue input (AI1)
1.3.4 Analogue input (AI2)
The following table gives an overview of the “Analogue input AI1 and AI2” menu:
Universal Display text
1.3.3 Analogue input (AI1)
1.3.3.1 Signal type
1.3.3.2 Pressure sensor range
1.3.3.3 Pressure sensor position
1.3.3.3 / 1 Pump flange
1.3.3.3 / 2 Standard-compliant position
1.3.4 Analogue input (AI2)
1.3.4.1 Signal type
24 V DC power supply at the analogue input.
NOTICE
The 24 V DC power supply is only available when the analogue input AI1 or AI2 has
been configured for a type of use and a signal type.
12.5.1 Using the analogue input AI1 as a
sensor input (actual value)
The actual value sensor provides the following:
ƒ
Differential pressure sensor values for differential pressure control
ƒ
User-defined sensor values for PID control
When setting the control mode, the type of use of analogue input AI1 as an actual value
input (see Table 28) is automatically preconfigured.
To set the signal type, select the following in the menu: