E5 Series High Performance Universal Inverter User’s Manual
42
Chapter 5 Parameter List
Chapter 5 Parameter List
Meanings of Each Item in Parameter Table
Item
M e a n i n g s
No.
The number of parameter, such as P0.00
Name
The name of parameter, which explains the parameter’s meanings
Default
The value of factory setting (see P0.0T)
Range
The value from minimum value to maximum value that can be set to this parameter
Unit
V: Voltage; A: Current; %:Percentage; Hz, kHz: Frequency;
ms, s, min, h: Time; ºC: Celsius degree; Ω: Ohm; rpm: Revolutions per minute;
mH: Milli−henry; bps: Baud rate; kW: Power; T: No unit
Property
○: This parameter can be changed during operation
×: This parameter can only be changed during stopping status
*: This parameter is read−only
Description Parameter setting list and descriptions
User
Used for recording parameters by user
Note:
E5 series built−in multiple control mode for fan and pump to realize customized energy saving requirement. For
details, refer to the parameter descriptions of Pb.TT and Pb.TT.
E5 series built
−
in constant pressure control and sleep function. For details, refer to the parameter descriptions of
group H0.
5.T Complete Parameter List
No.
Name
Default
Range
Unit Property
Description
User
Group P0 Basic Function Parameters
P0.00 User password
0000
0000 ~ FFFF
T
○
0000: No password
Other: Password protection
P0.0T Parameters protection
0
0 ~ 5
T
×
0: All the parameters can be modified
T: All the parameters cannot be modified
T: Restore parameter values in zone P to factory
setting
3: Restore parameter values in zone P to factory
setting except group P9
4: Restore parameter values in zone P and zone
A to factory setting
5: Restore all the parameters to factory setting
except group d
P0.0T
Parameters display
mode
0
0 ~ 3
T
○
0: Basic menu mode
T: Fast menu mode
T: Non−factory setting menu mode
3: Last changed T0 parameters menu mode
P0.03 Control mode
0
0 ~ 3
T
×
0: Process open loop control
T: Analog feedback process close loop control
T: Single phase pulse feedback process close
loop control
3: Composite control
P0.04
Open loop main
reference channel
0
0 ~ 4
T
○
0: Open loop digital frequency reference(P0.05)
T: AIT analog reference
T: AIT analog reference
3: AI3 analog reference
4: DI pulse reference
P0.05
Open loop digital
frequency reference
50.00
0.00 ~ 300.00
Hz
○
P0.T3 ~ P0.T4
Summary of Contents for E5 Series
