E5 Series High Performance Universal Inverter User’s Manual
92
Chapter 6 Parameter Descriptions
It controls the action of the multi-function input terminal or output terminal by the host computer.
P7.T4 Virtual terminal effective selection
Ones place
Multi-function input terminal Xi
0: The real terminal is enabled
T: The virtual terminal is enabled
Tens place
Reserved
Hundreds place
YT, YT and relay terminals
0: The real terminal is enabled
T: The virtual terminal is enabled
When Xi terminal signal source is input as virtual terminal, whether the corresponding function of this
terminal is effective depends on the control of the host computer and has no relationship with the real
status of the current Xi terminal.
When Yi, YT and relay terminals are output as virtual terminals, the terminal output depend on the control
of the host computer and have no relationship with the parameter setting.
It defines the validity of the input and output status of the multi-function digital terminals.
P7.T5Input and output terminal active state selection
Ones place
Multi-function digital input terminal Xi
0: Xi is active if current flowing through Xi, positive logic
T: Xi is active if no current flowing through Xi, negative logic
Tens place
Multi-function output terminal Yi
0: YT is active if current flowing through YT, positive logic
YT is active if current flowing through YT, positive logic
T: YT is active if no current flowing through YT, negative logic
YT is active if current flowing through YT, positive logic
T: YT is active if current flowing through YT, positive logic
YT is active if no current flowing through YT, negative logic
3: YT is active if no current flowing through YT, negative logic
YT is active if no current flowing through YT, negative logic
Hundreds place
Relay output terminal
0: Relay is active if in magnetizing status, positive logic
T: Relay is active if not in magnetizing status, negative logic
Thousands place
Reserved
When the digital input Xi terminal and COM terminal are short together, whether the input status is valid
by judging whether there is current flowing through the terminals.
When the digital output Yi terminal acts as open collector output, whether the output status is valid by
judging whether there is current flowing through the terminal.
Whether the relay output status is valid by judging whether the relay is in the magnetizing status.
0000 ~ TT3T(0000)
Input and output terminal active state selection
P7.T5
000 ~ T0T(000)
Virtual terminal selection
P7.T4
Summary of Contents for E5 Series
