E5 Series High Performance Universal Inverter User’s Manual
Chapter 6 Parameter Descriptions
83
Figure6−T0 Percentage of input analog (voltageTpulse) Figure6−TT Percentage of input analog (current)
Figure6−TT Reference frequency curve (positive) Figure6−T3 Reference frequency curve (negative)
e.g. AIT input 4 ~ T0mA corresponding to 0 ~ 50Hz :
T) First, check the AIT jumper if is switched to I side
T) Setting P6.00 tens place to 0, select curve T
3) Setting P6.0T=T0.0
4) Fine tuning maybe required because of zero drift, for example setting P6.0T=T0.T, P6.03=99.8
0.0 ~ TT0.0 %( T00.0%)
Per unit value B3 corresponding to curve 4 input point A3
P6.T0
0.0 ~ TT0.0 %( T00.0%)
Curve 4 input point A3
P6.T9
0.0 ~ TT0.0 %( 50.0%)
Per unit value BT corresponding to curve 4 input point AT
P6.T8
0.0 ~ TT0.0 %( 50.0%)
Curve 4 input point AT
P6.T7
0.0 ~ TT0.0 %( T5.0%)
Per unit value BT corresponding to curve 4 input point AT
P6.T6
0.0 ~ TT0.0 %( T5.0%)
Curve 4 input point AT
P6.T5
0.0 ~ TT0.0 %( 0.0%)
Per unit value B0 corresponding to curve 4 input point A0
P6.T4
0.0 ~ TT0.0 %( 0.0%)
Curve 4 input point A0
P6.T3
0.0 ~ TT0.0 %( T00.0%)
Per unit value BT corresponding to curve 3 input point AT
P6.TT
0.0 ~ TT0.0 %( T00.0%)
Curve 3 input point AT
P6.TT
0.0 ~ TT0.0 %( 0.0%)
Per unit value B0 corresponding to curve 3 input point A0
P6.T0
0.0 ~ TT0.0 %( 0.0%)
Curve 3 input point A0
P6.09
Summary of Contents for E5 Series
