E5 Series High Performance Universal Inverter User’s Manual
54
Chapter 5 Parameter List
No.
Name
Default
Range
Unit Property
Description
User
Pb.T7 Preset frequency
0.00
0.00 ~ 300.00
Hz
○
0.00 ~ 300.00Hz
Pb.T8
Preset frequency
operating time
0.0
0.0 ~ 3600.0
s
○
0.0 ~ 3600.0s
Pb.T9 Wake-up frequency
0.00
0.00 ~ 300.00
Hz
○
0.00 ~ 300.00Hz
Pb.T0 Sleep frequency
0.00
0.00 ~ 300.00
Hz
○
0.00 ~ 300.00Hz
Pb.TT
Fan and pump control
mode selection
0
0 ~ 3
T
○
0: Basic running mode
T: Pre
−
overload decelerate frequency mode
T: Forced energy saving mode T(square type load)
3: Force energy saving mode T(cube type load)
Pb.TT
Forced energy saving
rate reference
T0
0.0 ~ 50.0
%
○
Only enabled when Pb.TT=T or Pb.TT=3
Pb.T3 Parameters copy
0
0 ~ 5
T
×
0: No function
T: Parameter upload
T: Parameter download (without motor parameters)
3: Parameter download (with motor parameters)
4: Parameter upload is not allowed
5: Parameter upload is allowed
Group PC Communication Parameters
PC.00
Communication baud
rate
5
4 ~ 8
bps
○
4: 4800 bps
5: 9600 bps
6: T9T00 bps
7: 38400 bps
8: 57600 bps
PC.0T Data format
0
0 ~ T
T
○
0: T−8−T format, no parity
T: T−8−T format, even parity
T: T−8−T format, odd parity
PC.0T Local address
T
T ~ T47
T
○
T ~ T47, 0 is broadcasting address
PC.03
Communication
parameters setting
303
303 ~ F0F
T
○
Ones place: Terminal RS485 setting
bit0=0: Without reply
bit0=T: Reply if communication with host
computer
bitT=0: Will not reply if communication
disconnected
bitT=T: Reply if communication disconnected
bitT=0: Communication will not detect password
bitT=T: Communication will detect password
bit3=0: 0x06 and 0xT0 command
communication write RAM
bit3=T: 0x06 and 0xT0 command
communication write EEPROM
Tens place: Reserved
Hundreds place: Operation panel RS485 setting:
same as ones place
PC.04 Master
−
slave mode
0
0 ~ T
T
○
0: SCIA slave mode, SCIB slave mode
T: SCIA master mode, SCIB slave mode
T: SCIA slave mode, SCIB master mode
PC.05
Operating address from
master to slave
0
0 ~ T
T
○
The parameter is setting in master
0: P0.05
T: P8.00
T: P8.0T
PC.06
Slave received value
proportional
T.00
0.00 ~ T0.00
T
○
The parameter is setting in slave
Summary of Contents for E5 Series
