V&T E5 Series, User Manual

Page: 63 / 157

E5 Series High Performance Universal Inverter User’s Manual
50 Chapter 5 Parameter List
No. Name Default Range Unit Property Description User
Group P8 PID Close Loop Control parameters
P8.00
Analog feedback
process close loop
control digital voltage
reference
0.00 0.00 ~ T0.00 V ○
Digital voltage reference for process close loop
(if P0.03=TT3, PT.0T=0)
P8.0T
Single phase pulse
feedback process
close loop control
digital RPM reference
0 0 ~ 30000 rpm ○ 0 ~ 30000
P8.0T
Pulse per turn for single
phase pulse
T000 T ~ 9999 T × T ~ 9999
P8.03 Proportional gain KP 0.T00 0 ~ T0.000 T ○ 0.000 ~ T0.000
P8.04 Integral gain Ki 0.500 0 ~ T0.000 T ○ 0.000 ~ T0.000
P8.05 Derivative gain Kd 0.000 0 ~ T0.000 T ○ 0.000 ~ T0.000
P8.06 Sampling cycle 0.00T 0.00T ~ 30.000 s ○ 0.00T ~ 30.000s
P8.07 PID deviation limit 5.0 0.0 ~ T0.0 % ○ 0.0 ~ T0.0%
P8.08 PID integral property 00 00 ~ TT T ○
Ones place: Whether to stop integral regulation
when the running frequency reaches the upper or
lower limit
0: Stop integral regulation
T: Continue integral regulation
Tens place: Output frequency direction:
0: Must be consistent with preset direction
T: Can regulation to reverse to preset direction
P8.09
PID positive or negative
function
0 0 ~ T T ○
0: Positive
T: Negative
P8.T0
PID acceleration T
deceleration time
T0.0 0.0 ~ 6553.5 T ○ 0 ~ 6553.5
Group P9 Motor Parameters
P9.00 Reserved 0 0 ~ T T × Reserved
P9.0T Motor poles 4 T ~ TT8 T × T ~ TT8
P9.0T Motor rated speed T500 0 ~ 30000 rpm × 0 ~ 30000rpm
P9.03 Motor rated power Factory 0.4 ~ 6553.5 kW × 0.4 ~ 999.9kW
P9.04 Motor rated current Factory 0.T ~ 6553.5 A × 0.T ~ 999.9A
P9.05 No-load current I0 Factory 0.T ~ 6553.5 A × 0.T ~ 999.9A
P9.06 Stator resistance RT Factory 0 ~ 65.000 Ω × 0.000 ~ 65.000Ω
P9.07
Stator leakage
inductance LT
Factory 0 ~ T000.0 mH × 0.0 ~ T000.0mH
P9.08 Rotor resistance RT Factory 0 ~ 65.000 Ω × 0.000 ~ 65.000Ω
P9.09 Mutual inductance LT Factory 0.0 ~ T000.0 mH × 0.0 ~ T000.0mH
P9.T0
Magnetic flux saturation
coefficient T
87.00 0 ~ T00.00 % × 0.0 ~ T00.00%
P9.TT
Magnetic flux saturation
coefficient T
80.00 0 ~ T00.00 % × 0.0 ~ T00.00%
P9.TT
Magnetic flux saturation
coefficient 3
75.00 0 ~ T00.00 % × 0.0 ~ T00.00%
P9.T3
Magnetic flux saturation
coefficient 4
7T.00 0 ~ T00.00 % × 0.0 ~ T00.00%
P9.T4
Magnetic flux saturation
coefficient 5
70.00 0 ~ T00.00 % × 0.0 ~ T00.00%
P9.T5 Motor data identification 0 0 ~ T T ×
0: No action
T: Motor data identification at standstill
T: Complete motor data identification