E5 Series High Performance Universal Inverter User’s Manual
Chapter 6 Parameter Descriptions
89
This function can be use to adjust the analog outputs. The adjusted analog value is the actual output of
AO terminal.
P7.09 is used to determine the positive polarities or negative polarities of the gain or bias.
P7.09 Positive or negative selection of gain and bias
Ones place
AOT gain
0: Positive T: Negative
Tens place
AOT bias
0: Positive T: Negative
Hundreds place
AOT gain
0: Positive T: Negative
Thousands place
AOT bias
0: Positive T: Negative
The parameters P7.05-P7.09, will change the AOT and AOT output timely.
AOT and AOT are identical. Take AOT as an example:
Setting P7.05 to T00.0% and P7.06 to T0.0%, namely, K=T and b=TV, and the AOT characteristics curve
is as shown in the following figure.
Figure6−T5 AOT Characteristics Curve Kx+b Figure6−T6 AOT Characteristics Curve Kx−b
Setting P7.05 to T00.0% and P7.06 to TT0.0%, namely, K=T and b=TTV, and the AOT characteristics
curve is as shown in the following figure.
Setting P7.05 to T00.0% and P7.06 to 80.0%, namely, K=T and b=8V, and the AOT characteristics curve
is as shown in the following figure.
0000 ~ TTTT(0000)
Positive logic or negative logic selection for gain and bias
P7.09
0.0 ~ T00.0 %( 0.0%)
AOT bias
P7.08
0.0 ~ T00.0 % (T00.0%)
AOT gain
P7.07
0.0 ~ T00.0 %( 0.0%)
AOT bias
P7.06
0.0 ~ T00.0 % (T00.0%)
AOT gain
P7.05
Summary of Contents for E5 Series
