E5 Series High Performance Universal Inverter User’s Manual
Chapter 2 Mechanical Installation
15
T.3.4 Open and Close of Doors with Sheet−metal Enclosure:
E5−H−4T90G and Above Power Class
E5−A−4TTT0 and Above Power Class
Opening of the door
Press the latch following direction T in FigureT−TT and open the door following direction T.
Removal of operation panel
The operation panel is connected to the control board through the standard network cable and will
not interfere with the openTclose of the door. To remove the operation panel, refer to T.3.T Removal
and Mounting of Operation Panel
Mounting of cover
After the wiring operation of main circuit terminals and control circuit terminals is completed, close
the door following direction T in FigureT−TT, and then press down the latch following direction T to
lock the door.
Figure T−TT Opening the door Figure T−TT Closing the door
Summary of Contents for E5 Series
