E5 Series High Performance Universal Inverter User’s Manual
Chapter 2 Mechanical Installation
13
T.3.T Removal and Mounting of Covers with Plastic Enclosure
Removal of operation panel
Please refer to T.3.T Removal and Mounting of Operation Panel.
Removal of lower cover
After removing the mounting screws of the cover, press the left and right sides of the cover
forcefully in direction T and lift the cover in direction T simultaneously, as shown in Figure T−5.
Removal of upper cover
As shown in FigureT−6, press the left and right sides of the cover forcefully in direction T, and lift the
cover in direction T simultaneously.
Figure T.5 Removal of lower cover Figure T−6 Removal of high cover
Mounting upper cover
After connecting the cables of main circuit terminals and control circuit terminals, insert the upper
claw grab of the upper cover into the groove of the inverter body, as shown in position T in
FigureT−7, and then press the lower part of the upper cover in direction T as shown in FigureT−7,
until the “crack” sound is heard.
Mounting lower cover
Insert the upper claw grab on the lower cover into the groove of the upper cover, as shown in
position T of FigureT−8, and then press the lower part of the lower cover in direction T of FigureT−8,
until the “crack” sound is heard. Now, tighten the cover screws.
Mounting operation panel
Please refer to T.3.T Removal and Mounting of Operation Panel.
FigureT−7 Mounting of upper cover FigureT−8 Mounting of lower cover
Summary of Contents for E5 Series
