E5 Series High Performance Universal Inverter User’s Manual
120
Chapter 6 Parameter Descriptions
6.T0 Controlled by Manufacture Parameters T (Group A0)
A0.0T is used to set the positive logic or negative logic for XT to X7 and AIT to AI3. The default is 03FF,
positive logic.
XT ~ X7,AIT ~ AI3 terminal positive logic or negative logic selection
0: Negative logic
T: Positive logic
bit0
XT positive logic or negative logic selection
bitT
XT positive logic or negative logic selection
bitT
X3 positive logic or negative logic selection
bit3
X4 positive logic or negative logic selection
bit5
X5 positive logic or negative logic selection
bit6
X6 positive logic or negative logic selection
bit7
X7 positive logic or negative logic selection
AIT
AIT positive logic or negative logic selection
AIT
AIT positive logic or negative logic selection
AI3
AI3 positive logic or negative logic selection
0 ~ T(0)
Reserved
A0.0T
0 ~ FFFF (FFFF)
Reserved
A0.04~A0.TT
0.0 ~ T00.0% (T00.0%)
Auxiliary reference limit percentage
A0.03
0 ~ FFFF(03FF)
XT ~ X7, AIT ~ AI3 terminal positive logic or negative logic selection
A0.0T
0000 ~ FFFF(factory)
Reserved
A0.00
Summary of Contents for E5 Series
