E5 Series High Performance Universal Inverter User’s Manual
Chapter 1 Product information
5
Protection
function
Power supply under-voltage, over-current protection, over-voltage protection, interference protection,
abnormal comparison level, motor data identification failure, module(IPM) protection, heat-sink over
temperature protection, inverter overload protection, motor overload protection, peripheral protection,
abnormal current detection, output short circuit to ground, interruption of power supply when in running
status, abnormal input power, output phase loss, abnormal EEPROM protection, abnormal pre-charging
contactor detection, temperature sampling disconnection, abT0V power supply, abnormal
analog input, motor over temperature protection(PTC), abnormal communication, abnormal software
version compatibility, abnormal copying, terminal mutual exclusion detection, hardware overload
protection
Efficiency
At rated power:
E5-H series: 7.5kW and below power class ≥93%
45kW and below power class ≥95%
55kW and above power class ≥98%
E5-A series: 55kW and below power class ≥95%
75kW and above power class ≥98%
Environment
Operating site
The product should be mounted vertically in the electric control cabinet with
good ventilation. Horizontal or other installation modes are not allowed. The
cooling medium is the air. The product should be installed in the environment
without dust, corrosive gas, combustible gas, oil mist, steam, drip and free
from direct sunlight
Ambient temperature
−T0 to +40ºC, the product must be de-rated rated output current for the
ambient temperature between 40ºC to 50ºC, the rated output current must be
de-rated for T% per TºC temperature rise
Humidity
5 to 95%, no condensing
Altitude
0 to T000m, the product must be de-rated rated output current for the altitude
above T000 meters, the rated output current must be de-rated for T% per T00
meters rise
Vibration
3.5mTs
T
,T to 9Hz; T0 mTs
T
,9 to T00Hz; T5 mTs
T
,T00 to 500Hz
Storage temperature
−40 to +70ºC
Note:
AI3 and terminal 485 are only available for “E5−H−4T**G−63”, “E5−H−4T**G−34” non−standard series and E5−A series
Summary of Contents for E5 Series
