E5 Series High Performance Universal Inverter User’s Manual
68
Chapter 6 Parameter Descriptions
Up to 4 parameters can be set and displayed in stop status, and viewed circularly by pressing >> key.
PT.0T Display parameter selection in stop status
Ones place
0: Reference frequency (Hz)
T: Bus voltage (V)
T: AIT (V)
3: AIT (V)
4: AI3 (V)
5: DI (%)
6: External counts
7: Motor rotation speed (rpm)
8: Close loop reference (%)
9: Close loop feedback (%)
A: Reserved
B: Reserved
C: Reserved
D: Reserved
E: Reserved
F: Reserved
Tens place
Same as above
Hundreds place
Same as above
Thousands place
Same as above
If the parameter is to be displayed has proportion relation with a physical value in the operation display
parameter defined by PT.0T, PT.04 can be used to designate the physical value as the display
benchmark, and PT.05 can be used to set the coefficient of the display benchmark.
When a parameter is to be displayed (i.e. PT.05≠0), the physical value will be automatically added into
the display parameter in running status and can be viewed by pressing >> key. In this situation, there will
be 5 parameters are displayed. The unit indicator light for the newly added parameter are LED A and
LED V.
If the parameter is to be displayed has proportion relation with a physical value in the stop display
parameter defined by PT.03, PT.06 can be used to designate the physical value as the display
benchmark, and PT.07 can be used to set the coefficient of the display benchmark.
When a parameter is to be displayed (i.e. PT.07≠0), the physical value will be automatically added into
the display parameter in stop status and can be viewed by pressing >> key. In this situation, there will be 5
parameters are displayed. The unit indicator light for the newly added parameter are LED A and LED V.
Display parameter coefficient in stop status
PT.07
0 ~ F (0)
Display parameter benchmark in stop status
PT.06
0.0 ~ T000.0% (0.0%)
0.0 ~ T000.0% (0.0%)
Display parameter coefficient in running status
PT.05
0 ~ F (0)
Display parameter benchmark in running status
PT.04
0000 ~ FFFF (3TT0)
Display parameter selection in stop status
PT.03
Summary of Contents for E5 Series
