Trend Micro InterScan M Series, Administrator'S Manual

Page: 58 / 480

Trend Micro™ InterScan™ Gateway Security Appliance M-Series Administrator’s Guide
2
-
20
Note: To prevent accidental shutdown of the appliance, the appliance power switch has
been modified from the standard On/Off convention. To power on InterScan
Gateway Security Appliance, simply press the Power Switch upward from the 0 to
1 position. To power off InterScan Gateway Security Appliance, press the power
switch upward from 0 to 1 and
hold it in that position for a minimum of five
seconds, until the appliance powers off.
Testing the Appliance Connectivity
Perform either of the following tasks to test whether you have successfully configured
the InterScan Gateway Security Appliance.
To test if the device is configured properly, do one of the following:
1. Ping the device to verify connectivity; you can obtain the IP address by looking
at the LCD panel on the front of the device.
2. Browse the InterScan Gateway Security Appliance Web interface by going to a
PC on the protected network and opening an Internet Explorer browser to
https://{The appliance IP Address}
Activating the Appliance
The Trend Micro sales team or sales representative provides the Registration Key.
Use the Registration Key to obtain a full version Activation Code.
To obtain the Activation Code:
1. Visit the Trend Micro Online Registration Web site.
(
https://olr.trendmicro.com/registration
). The Online Registration
page of the Trend Micro Web site opens.
2. Perform one of the following:
• If you are an existing Trend Micro customer, log on using your logon ID and
password in the
Returning, registered users section of the page.
• If you are a new customer, select your Region from the drop-down menu in
the Not Registered section of the page and click Continue .
3. On the Enter Registration Key page, type or copy the InterScan Gateway
Security Appliance Registration Key, and then click Continue .