Trend Micro InterScan M Series, Administrator'S Manual

Page: 343 / 480

Updating the InterScan Gateway Security Appliance Firmware
15
-
23
Note: After you select the upload option, the appliance waits for the upload for up to 10
minutes, at which point it times out.
Using the Appliance Firmware Flash Utility with Option 5
Before launching the Appliance Firmware Flash Utility (AFFU), ensure that the IP of
your PC is within the same segment as the IP of the appliance.The appliance IP
address appears on the preconfiguration console screen that appears when you select
option 5 -
Update Device Image & Restore Default Configura-
tion
(see figure 15-19, Preconfiguration console screen that appears when you
select option 5 in rescue mode ). (For more information on how to get the IP address
of the local computer, see Getting the IP Address of the Local PC on page 15-12).
To upload the device image update using the Appliance Firmware Flash Utility:
1. Put the appliance Solutions CD into the local computer. The following screen
appears:
F
IGURE
15-21. The appliance Solutions CD splash screen
Note: If for some reason the above screen does not appear after you put the CD in
the CD-ROM drive, locate the file
setup.exe and click it. The screen will
appear.