Trend Micro InterScan M Series, Administrator'S Manual

Page: 282 / 480

Trend Micro™ InterScan™ Gateway Security Appliance M-Series Administrator’s Guide
13
-
14
If you deployed InterScan Gateway Security Appliance on a network with multiple
segments, you need to set up the static route. When changing the device IP address or
the static route settings in this scenario, Trend Micro recommends using a computer
that is on the same network segment as IGSA. This will help ensure that you do not
lose the connection with the appliance. For example, if the gateway IP address has
changed but the static route has not yet been updated on IGSA, you may not be able
to access the Web interface if you are using a computer that is on a different network
segment.
Note: You can only add a static route if InterScan Gateway Security Appliance is using a
static IP address.
To add a Static Route:
1. From the left-side menu, click Administration > IP Address Settings.
2. Click the Static Routes tab.
3. Click Add . The Add Static Route screen appears.
F
IGURE
13-9.
Add Static Routes