Trend Micro InterScan M Series, Administrator'S Manual

Page: 437 / 480

Technology Reference
C
-
9
To enable or disable LAN bypass and Link state failover:
1. Access the Preconfiguration console as described in Accessing the
Preconfiguration Console on page C-5.
2. Select option 3 , Interface Settings . The following screen appears:
3. Use the T
AB
key to select the LAN bypass field
4. Press the S
PACE
bar on your keyboard to choose between disabled and enabled.
The LAN bypass value toggles between disabled and enabled.
5. Use the T
AB
key to select the Link state failover field
6. Press the S
PACE
bar on your keyboard to choose between disabled and enabled.
The Link state failover value toggles between disabled and enabled.
7. Use the T
AB
key to select the Return to Main Menu field and press E
NTER
. The
Main Menu screen appears.
8. Select option 8 , Log Off with Saving and press E
NTER
. The system saves your
settings and logs you off from the Preconfiguration console.
Interface Settings
Current Interface Setting:
Name MNG EXT INT
=====================================================================
speed&duplex auto auto auto
Link state failover: [disable] Use Space to change the value
LAN bypass: [disable] Use Space to change the value
10H: 10 Mbps x half-duplex 1000F: 1000 Mbps x full-duplex
10F: 10 Mbps x full-duplex auto: automatically select the best
100H: 100 Mbps x half-duplex
100F: 100 Mbps x full-duplex
Return to Main Menu
,<TAB>:Change field. <Space>:Change Value. <ENTER>:Select field.
F
IGURE
C-6.
Preconfiguration console Interface Settings screen