Trend Micro InterScan M Series, Administrator'S Manual

Page: 326 / 480

Trend Micro™ InterScan™ Gateway Security Appliance M-Series Administrator’s Guide
15
-
6
Backing Up Your Configuration
When the device image updates, all information stored on the Compact Flash (CF)
card will be overwritten. Therefore, if you wish to preserve your existing
configuration, it is essential that you back up the appliance configuration before
updating the appliance device image. This information is stored in a variety of logs,
as listed below:
• Anti-Pharming
• Anti-Phishing
• Anti-Spam: Content Scanning
• Anti-Spam: Email Reputation Services
• Anti-Spyware/Grayware
• Content Filtering
• Damage Cleanup
• File Blocking
• IntelliTrap
• System
• Update
• URL Filtering
• Viruses/malware
To back up the appliance configuration information:
1. Log on to the appliance Web console by pointing an Internet Explorer Web
browser to the IP address that you assigned to the appliance when you installed it.
(For example, https://10.1.151.5)
Note: Remember to use secure http, that is https:// and not http://
.
2. From the main menu, click Administration > Configuration Backup
.
The
Configuration Backup screen appears.
3. In the Backup Current Configuration section, click Backup
.
A screen appears
asking you where to save the file (on your network or on the PC you are using to
access the Web console). The default configuration file name is
igsa_config.dat
, but you can change it to anything you like.