Treaton MPR6-03, User Manual

Page: 188 / 193

188
The battery must be charged when storing the device. Storing the device
with a discharged battery and not training the battery during storage leads
to premature battery failure.
8. TRANSPORTATION
For transportation, the device is placed in a polyethylene case in accordance with GOST 10354,
and installed in a cardboard box TESM.516400.
The sensors are rolled up and placed in a polyethylene case and, together with consumables,
are packed in a package TESM.216004 for accessories (2 pcs.), which, in turn, are packed into
a box with a device.
The box valves must be sealed with adhesive tape in accordance with GOST 18251. The box is
installed in a plank box in accordance with GOST 2991, laid inside with GOST 8828 wrapping
paper and sealed with corrugated cardboard in accordance with GOST 7376. The weight of the
box (gross) shall not exceed 30 kg.
The device shall be transported in manufacturer packing in a fixed condition by all types of cov-
ered transport without limitation of distance, according to the transportation regulations on the
current type of transport.
The device shall be transported at air temperature from -
50 to +50 °С. After transportation under
nega-tive temperatures, device should be sustained before unpacking in normal climatic condi-
tions within 12 hours.
9. DISPOSAL
After end of service life or upon degradation of the device, the device should be utilized.
The device shall be disposed in accordance with the local rules for collection, storage and dis-
posal of waste from medical facilities in the country of using the device.
Dispose the packaging materials from accessories including packaging
from disposable accessories according to your national standards and your
facility’s guide-lines for waste disposal.
Before disposal the device shall be cleaned and disinfected.
For countries covered by Directive 2012/19/EU (WEEE):
The device is not intended for household use and is not subject to disposal
with standard electrical and electronic equipment.