Transas T214, Technical Manual

Page: 113 / 115

Troubleshooting
Chapter 9. List of alarms and troubleshooting.
111
Text description of state Identifier
(number)
System state (response)
Internal DGNSS in use
(beacon) 23
Continues operation
Internal DGNSS in use
(message 17) 24
Continues operation
Internal GNSS in use 25 Continues operation
Channel control parameters
have been changed or there
has been region re-assignment 35
Continues operation with region re-
assignment
UTC clock found 57 Continues operation
Ext.pos.src. in normal mode 60 Continues operation
Ext.pos.src. in diff. mode 61 Continues operation
Ext.pos.not available 62 Continues operation
Ext.pos.is manual entered 63 Continues operation
Ext.pos.is dead reckoning 64 Continues operation
Ext.pos.src. is inoperative 65 Continues operation
Int.pos.src. in normal mode 66 Continues operation
Int.pos.src. in diff. mode 67 Continues operation
Int.pos.not available 68 Continues operation
Int.pos.is manual entered 69 Continues operation
Int.pos.is dead reckoning 70 Continues operation
Int.pos.src. is inoperative 71 Continues operation
Direct TDMA synchronization 73 Continues operation
Indirect TDMA synchronization 74 Continues operation
TDMA synchronization by base
station 75
Continues operation
TDMA synchronization by
semaphore 76
Continues operation
No TDMA synchronization 77 Continues operation
10.2
TROUBLESHOOTING
The table below provides a list of possible faults. For each malfunction the table
specifies its group, external manifestation and probable cause.
Table 6. List of malfunctions