Transas T214, Technical Manual

Page: 106 / 115

Proprietary sentences
TRANSAS AIS BASE STATION T214. Technical Manual.
104
Current power status request
Request: !EIAIQ, UNIT=0, POWER=?*CS<CR><LF>
Answer: !AIPWR, UNIT=0, POWER={0|1}*CS<CR><LF> (where 0 means
Power OFF, 1 means Power ON).
Power supply control
Command: !EIAIQ, UNIT=0, POWER={0|1}*CS<CR><LF> (where 0 means
Power OFF, 1 means Power ON).
Answer: !AIPWR, UNIT=0, POWER={0|1}*CS<CR><LF> (where 0 means
Power OFF, 1 means Power ON).
9.3.2
Advanced power supply status sentences
The advanced power supply status sentences are available only on the hardware
versions of T214 with backup 24VDC power input. The following requests are
available:
Current power source request
Request: !EIAIQ, UNIT=0, PWSRC=?*CS<CR><LF>
Answer: !AIPWR, UNIT=0, PWSRC={0|1}*CS<CR><LF> (where 0 means
primary AC power, 1 means backup DC power).
Note: T214 automatically select available power source. When the power
source is automatically changed, the corresponding notification
“!AIPWR, UNIT=0, PWSRC={0|1}*CS<CR><LF>” will be send without
request.
Power sources voltage request
Request: !EIAIQ, UNIT={0|1}, PWVLT=?*CS<CR><LF> (where 0 means
primary AC power supply, 1 means backup DC power)
Answer: !AIPWR, UNIT={0|1}, PWVLT=XX.X*CS<CR><LF> (where 0
means primary AC power supply, 1 means backup DC power, XX.X -
current voltage of requested source in volts DC (for example 24.5)).
9.3.3
Fan speed diagnostic sentences
Request: !EIAIQ,UNIT=0,BSFAN=?*CS<CR><LF>
Answer: !AIPWR,UNIT=0, BSFAN =XXXX*CS<CR><LF> (where XXXX – fan
speed in rev. per min)
9.3.4
Internal temperature diagnostic sentences
Request: !EIAIQ,UNIT=0,BSTMP=?*CS<CR><LF>
Answer: !AIPWR,UNIT=0, BSTMP =XX*CS<CR><LF> (where XX – internal
temperature in degrees Celsius)
9.3.5
Digital I/O control commands
Digital Outputs control:
Command: !EIAIQ,UNIT={1|2|3},DGOUT={0|1}*CS<CR><LF>
Answer: !AIPWR,UNIT={1|2|3},DGOUT={0|1}*CS<CR><LF>