Transas T214, Technical Manual

Page: 93 / 115

Operating using Remote Control software
Chapter 7. System Operation.
91
7.4.7
Control and extended diagnostics
To control the T214 Base Station and obtain its extended diagnostics, switch to the
“BS Control” tab:
The tab contains:
•
Power On/Off Control stay-put button for the remote power switching on/off.
•
Group of fields showing the extended Т 214 diagnostics:
o
main/standby power supply;
o
voltage of the main (secondary) and standby power supplies;
o
cooling fan rpm;
o
internal temperature within the Base Station.
•
Three buttons for the control of digital outputs.
•
Three light diodes reflecting the status of digital inputs.
•
Active Base Station selection buttons (in dual configuration).
•
Reset button fro restarting the Base Station.
7.4.8
Configuring
To configure the T214 AIS Base Station T214 switch to the “BS Configuration” tab.
Use the “Reload” button to read off the current Base Station settings and the “Save”
button for loading parameters in the Base Station.
Take special care when changing the AIS Base Station configuration parameters,
because this may result in disrupted operation of not only the Base Station itself, but
of the entire AIS region and adjacent AIS regions.
A
TTENTION
!