Transas T214, Technical Manual

Page: 97 / 115

Operating using Remote Control software
Upgrading of AIS Base Station firmware. System Operation.
95
8.
UPGRADING OF AIS
BASE STATION
FIRMWARE
8.1.1
Necessary conditions
The AIS Base Station T214 firmware upgrade can be made locally or remotely by
using the Remote Control component detailed in the previous paragraph. For the
upgrade operation to be performed, the Base Station Controller SW should be
connected to the Base Station via both presentation ports (Main and Aux) as
described under 7.4.2.
Check that the running Base Station Controller SW component has established
connection via the Data (Main port) and Service (Aux port) port - see the drawing.
8.1.2
Upgrade procedure
For the firmware upgrade switch to the “BS Firmware Upgrade” tab of the Base
Station Configurator component. For accessing the upgrade function, you should
have the “Administrator” access level.
For the time of the firmware upgrade, it is necessary to ensure the warranted Base
Station supply for the Base Station and the computer running the Base Station
Controller SW.
A
TTENTION
!