Transas T214, Technical Manual

Page: 87 / 115

Operating from front panel
Chapter 7. System Operation.
85
7.3.2
Indication panel
Led indicators for general diagnostic are located on front panel. They indicate the
status of BS main components in accordance with Table 2:
Table 2.. Front panel indication
Indicator
group
Name Functional status Description of indication
Normal functioning Continuous green lighting
Firmware upgrading
mode Flashing 1 Hz
General
Abnormal functioning Continuous red lighting
Normal functioning Continuous green lighting
STATUS
GNSS
Abnormal functioning Continuous red lighting
after one minute checking
of status
Absence of received
signals from other AIS No lighting
Received signal from
other AIS Green flash
Receive
Malfunction of one of
receivers Continuous red lighting
No transmissions No lighting
Signal transmitted Green flash
VDL
ACTIVITY
Transmit
Malfunction of the
transmitter Continuous red lighting
No input data via
RTCM port No lighting Port input
Data of differential
corrections received Green flash
No transmissions of
differential corrections No lighting
RTCM
VDL
Output
Differential corrections
transmitted Green flash
There is basic power
but status “OFF” Continuous orange lighting
There is basic power
and status “ON” Continuous green lighting
Basic power is absent,
there is back up power
but status is “OFF” Flashing 1Hz
Basic power is absent,
there is back up power
but status is “ON” Flashing 1Hz
POWER Status
Main power is switched
OFF (on back side) No lighting