Transas T214, Technical Manual

Page: 111 / 115

List of alarms
Chapter 9. List of alarms and troubleshooting.
109
10.1
LIST OF ALARMS
All the malfunctions are divided into five groups:
1) Complete failure of the main unit including auto testing system failure;
2) Complete failure of the main unit, diagnostics provided on the Service Port;
3) Partial failure of the main unit with the diagnostics AISALR messages
provided on the presentation interface and on the Service Port;
4) Failure of individual assemblies whose auto diagnostics is not supported;
5) CFP failure (complete or partial) whereby the main unit remains operational.
If malfunctions of group 3 are detected, the Service Port outputs the same
malfunction code as in the AISALR sentence output via the presentation interface.
The tables provide a list of alarms states and malfunctions.
Table 4. Codes of AIS alarms and states
Text of
malfunction/failure
description Threshold-
exceeded
indicator OK
indicator Alarm of text
message
identifier
System response
Tx malfunction А V 001 Stops the
transmission
Antenna VSWR
exceeds limit А V 002 Continues
operation
Rx channel A
malfunction А V 003 Stops transmission
on the damaged
channel
Rx channel B
malfunction А V 004 Stops transmission
on the damaged
channel
General failure А V 006 Stops transmission
Clock lost A V 007
Independent –
follow
synchronisation
rules including
semaphore.
Dependent – follow
synchronisation
rules. Stop
transmission when
there is no
synchronisation
source.
MKD connection lost А V 008 Continues
transmission with
DTE set to “1”