Transas T214, Technical Manual

Page: 56 / 115

Setup of control port functions
TRANSAS AIS BASE STATION T214. Technical Manual.
54
4. Follow directions on the Service Display: call the service centre and advise the
request code specified on the Service Display. You will have to provide some
proof to the service centre that you have a right to access the AIS.
Do not close the window till you will be informed code to restore the old password.
5. The service centre will advise the password enable code. Press “Yes” and enter
this code.
6. The Service Display will display the password.
6.4
SETUP OF CONTROL PORT FUNCTIONS
The Main and AUX ports are intended for connection of the external control
equipment. The standard port assignment is:
•
Main – main presentation port;
•
Aux – auxiliary presentation port;
•
RTCM – reception of differential corrections.
Corresponding to the aforementioned port assignment are the initial settings of their
functions. These settings can be altered in the Configuration->Setup->Control setup
menu.
W
ARNING
!