Transas T214, Technical Manual

Page: 60 / 115

Adjusting list of output alarm messages
TRANSAS AIS BASE STATION T214. Technical Manual.
58
Port name St. Parameters Notes
RTCM On 4800, N, One
Int. RTCM On 4800, N, One Please don’t change
The change of settings for each of the ports is made in a separate window; to do
this, use the cursor to select the required port and press the “Setup” button.
Notes:
Main and Aux ports mentioned above are internal Base Station ports.
Please don’t change their parameters. To setup Main and AUX external
ports parameters please refer to 5.1.
Display port (used exclusively for the connection of the Service Display)
does not require any setting up and is not mentioned in the setup menu.
6.6
ADJUSTING LIST OF OUTPUT ALARM MESSAGES
You can use the Configuration->Setup->Alarms menu for adjusting (On/Off) the list
of alarms which will be output by AIS Base Station
Т 214.