COMPONENT MAINTENANCE MANUAL
Publication No. 051019-1 Rev H
Page 64
33-46-00
AS9100 Certified
Rev G
26-Mar-2014
Figure 44 - Searchlight Initialisation (Full POST).
NOTE: The Searchlight will only initialise if the unit was not stowed prior to the previous
Power Off or if an over current occurred. If required, the Searchlight will initialise in
both axes independently (or concurrently). The unit will not move to the STOW
position until both axes have successfully initialised.
A151
Power On
Was unit
stowed?
Previous
Overcurrents?
Yes
No
Start Azimuth
Initialisation Move
Left
Start Elevation
Initialisation Move
Up
Moving Left?
Left Stop
Found?
Yes
Move Right
Yes
Moving Right?
No
Right Stop
Found?
Stop Azimuth
Movement
Yes
Yes
Moving Up?
Moving Down?
Move Down
Stop Elevation
Movement
Upper Stop
Found?
Lower Stop
Found?
Yes
Yes
No
No
No
Yes
No
Yes
No
Yes
Go to Stow
Position
End
Wait until
Elevation
Complete
Wait until Azimuth
Complete
No
No
Azimuth &
Elevation
Initialisation
Complete?
Yes
No
No
Carry out short POST.
Refer to short POST
AIRBUS HELICOPTERS: CMM L334M6304E01 ISSUE: B PAGE 82 OF 165
The document reference is online, please check the correspondence between the online documentation and the printed version.
