COMPONENT MAINTENANCE MANUAL
Publication No. 051019-1 Rev H
Page 127
33-46-00
AS9100 Certified
Rev G
26-Mar-2014
(4) Zoom Mechanism (Figure 95, Detail A)
(a) Use dry, low pressure compressed air to remove sand/dust.
(b) Use a light brush to remove any stubborn particles.
(c) Inspect for damage to the moving parts.
(d) Inspect electrical cables for damage.
(5) Filter mechanism and filter wheel (Figure 95, Detail B).
(a) Use dry, low pressure compressed air to remove sand/dust.
(b) Use a light brush to remove any stubborn particles.
(c) Inspect for damage to the moving parts.
(d) Inspect electrical cables for damage.
(6) Install the lamp assembly in accordance with Chapter 5, H.
Figure 96 - Azimuth Gearbox and Hard Stop Assembly
(7) Azimuth Hard Stop Assembly (Figure 96).
(a) Remove lower fairing in accordance with Chapter 5, C.
(b) Use dry, low pressure compressed air to remove sand/dust.
(c) Inspect for damage to gears and hard stop travel mechanism.
(d) Inspect electrical cables for damage.
(e) Install lower fairing in accordance with Chapter 5, C.
(8) Elevation Hard stop Assembly (Figure 97).
(a) Remove the dynamic leg hatch in accordance with Chapter 5, D.
(b) Use dry, low pressure compressed air to remove sand/dust.
(c) Inspect for damage to gears and hard stop travel mechanism.
(d) Inspect electrical cables for damage.
(e) Install the dynamic leg hatch in accordance with Chapter 5, D.
A497
Drive and Driven
Gears
Drive Shaft and
Hard Stops
AIRBUS HELICOPTERS: CMM L334M6304E01 ISSUE: B PAGE 145 OF 165
The document reference is online, please check the correspondence between the online documentation and the printed version.
