COMPONENT MAINTENANCE MANUAL
Publication No. 051019-1 Rev H
DOCUMENT UNCONTROLLED WHEN PRINTED
Page 37
33-46-00
AS9100 Certified
23-Mar-2015
Rev B
Item
Description
Function
12 Panel DIM Switch
•
This is used to increase/decrease the backlit panel
brightness (two position switch).
•
Holding the filter select/engage switch down whilst pressing
the Panel DIM switch (in either direction) changes the
system to “DAY” mode where the panel backlighting is off.
•
If the system is in “DAY” mode, pressing the panel dim
switch will automatically change to “NIGHT” mode and the
panel backlighting is ON. LEDs and 7 segment display are
at reduced brightness.
13 Zoom Toggle Switch
•
Move switch down to zoom lamp out (wide beam).
•
Move switch up to zoom lamp in (narrow beam).
Figure 21- Front Facia
Table 16 - Grip Hand Controller Front Facia Displays
Item
Description
Function
1
Laser Pointer indicator
•
The laser pointer indicator is used to show the state of the
laser pointer (ON/OFF).
2
Seven Segment Display.
•
Displays filter position slaving status and error messages.
•
Refer Table 18.
3
Camera Slave LED
•
During slave mode the camera slave LED will be
illuminated.
•
When calibrating camera slaving this LED will flash.
4
Lamp ON LED
•
Indicates lamp status (flashes for lamp start).
5
Unit Status LED
•
On
– system is deployed.
•
Off
– system is not deployed.
•
Flashing
– system is deploying.
L 002
1
2
5
3
4
Slave
LASER
Dim
Lamp
ON
Unit
Status
Stow
Deploy
M
as
te
r
Po
w
er
Fi
lte
r
AIRBUS HELICOPTERS: CMM L334M6304E01 ISSUE: B PAGE 55 OF 165
The document reference is online, please check the correspondence between the online documentation and the printed version.
