COMPONENT MAINTENANCE MANUAL
Publication No. 051019-1 Rev H
Page 38
DOCUMENT UNCONTROLLED WHEN PRINTED
33-46-00
AS9100 Certified
23-Mar-2015
Rev B
Figure 22- Indicators and Display Test
Table 17 - Grip Hand Controller Indicator and Display Test
Item
Description
Function
5
and
7
Indicator and Display Test
Figure 22
•
The grip hand controller has a “Lamp Test” function that will
increase all LED indicators, the seven segment display and
panel backlighting to full illumination. This allows the
operator to ensure all indicator displays and panel
backlighting are functional.
•
To operate, simultaneously press the DIM switch (item 5)
and press the filter SELECT/ENGAGE switch (item 7)
downwards. While these are held down, all indicators will
illuminate to full brightness and then revert to the previous
setting when the switch and button are released.
N. Grip Hand Controller Seven Segment Display Error Codes
Table 18 - Grip Hand Controller Error Codes
Code
Description
0
Did not complete POST.
1
Lamp will not start.
2
Over temperature fault.
3
Under voltage fault.
4
Filter mechanism failed.
5
Gimbal will not move in elevation or azimuth.
C
Camera not found.
Slave
Laser
Lamp
ON
Unit
Status
Stow
Deploy
M
ast
er
P
ow
er
Fi
lte
r
Dim
Filter
Engage
Filter
Select
5
7
L 003
AIRBUS HELICOPTERS: CMM L334M6304E01 ISSUE: B PAGE 56 OF 165
The document reference is online, please check the correspondence between the online documentation and the printed version.
