Toyota 2004 HIGHLANDER Owner'S Manual Download Page 86

Page: 86 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Make sure the “AIRBAG ON”

indicator light is illuminated when

using the seat belt extender for the

front passenger seat. If the

“AIRBAG OFF” indicator light is

illuminated, disconnect the extender

tongue from the seat belt buckle,

then reconnect the seat belt.

Reconnect the seat belt extender

after making sure the “AIRBAG ON”

indicator light is illuminated. If you

use the seat belt extender while the

“AIRBAG OFF” indicator light is

illuminated, the front passenger

airbag and side airbag on the front

passenger side may not activate

correctly, causing death or serious

injury in the event of collision.

Be sure to wear the seat belt with-

out the seat belt extender if you

can fasten the seat belt without the

extender.

Do not use the seat belt extender

when installing a child restraint

system on the front or rear passen-

ger seat. If installing a child re-

straint system with the seat belt

extender connected to the seat belt,

the seat belt will not securely hold

the child restraint system, which

could cause death or serious injury

to the child or other passengers in

the event of collision.

To connect the extender to the seat

belt, insert the tab into the seat belt
buckle so that the “PRESS” signs on

the buckle release buttons of the ex-

tender and the seat belt are both facing
outward as shown.

You will hear a click when the tab locks
into the buckle.
When releasing the seat belt, press on

the buckle release button on the extender,
not on the seat belt. This helps prevent

damage to the vehicle interior and extend-

er itself.

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands