Toyota 2004 HIGHLANDER Owner'S Manual Download Page 68

Page: 68 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

FOLDING DOWN SECOND SEATS

(vehicles without third seat)
Pull the seatback angle adjusting lever

to unlock the seatback and fold the
seatback down until it locks.

The seat position returns to the rear

−

most

position when the seatback is folded
down.

CAUTION

Be careful that the seat does not hit
a passenger or luggage.

NOTICE

Do not fold the second seat seatback
forward with the luggage cover hooks

attached.

Folding down the second seats will en-

large the luggage compartment. See
“—Stowage precautions” on page 305 in

Section 2 for precautions when loading

luggage.

CAUTION

When returning the seatback to the
upright position, observe the follow-

ing precautions in order to prevent

personal injury in a collision or sud-
den stop:

Make sure the seatback is securely

locked by pushing forward and rear-
ward on the top of the seatback.

Failure to do so will prevent the

seat belt from operating properly.

Make sure the seat belts are not

twisted or caught in the seatback
and are arranged in their proper

position and are ready to use.

FOLDING DOWN SECOND SEATS

(vehicles with third seat)
Pull the seatback angle adjusting lever

to unlock the seatback and fold the
seatback down until it locks.

Right side seat: The seat remains in posi-

tion when pushing the seat cushion back-
wards while folding down the seatback.

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands