Toyota 2004 HIGHLANDER Owner'S Manual Download Page 214

Page: 214 / 420

’04 HIGHLANDER_U (L/O 0308)

190

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

1. “DVD” button

This button turns on the DVD mode.

2. “SOURCE” button

This button turns on the rear seat en-
tertainment system and selects the
mode.

3. “OFF” button

This button turns off the rear seat en-
tertainment system.

4. Joystick

This joystick selects a control switch,
mode switch on the screen or the
menu for the disc.

5. “ENT” button

This button inputs the selected switch
or the selected menu for the disc.

6. “DISC/CH/PROG” button

This button skips directly to a desired
preset station, disc, track or chapter.

7. “

” button

This button fast forwards a screen
when the DVD player is operated.

8. “RETURN” button

This button skips to the predetermined
scene for the disc when the DVD play-
er is operated.

—Control buttons

Controller

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands