Toyota 2004 HIGHLANDER Owner'S Manual Download Page 117

Page: 117 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

Never install a rear

−

facing child re-

straint system on the front passen-

ger seat even if the “AIRBAG OFF”

indicator light is illuminated. In the
event of an accident, the impact of

the rapid inflation of the front pas-

senger airbag could cause death or
serious injury to the child if the

rear

−

facing child restraint system is

installed on the front passenger
seat.

Move seat

fully back

A forward

−

facing child restraint sys-

tem should be allowed to be

installed on the front passenger

seat only when it is unavoidable.

Always move the seat as far back

as possible even if the “AIRBAG

OFF” indicator light is illuminated,

because the front passenger airbag

could inflate with considerable

speed and force. Otherwise, the

child may be killed or seriously in-

jured.

On vehicles with side airbags and
curtain shield airbags, do not allow

the child to lean his/her head or

any part of his/her body against the
door or the area of the seat, front

or rear pillar or roof side rail from

which the side airbags or curtain
shield airbags deploy even if the

child is seated in the child restraint

system. It is dangerous if the side
airbag and curtain shield airbag in-

flate, and the impact could cause

death or serious injury to the child.

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands