Toyota 2004 HIGHLANDER Owner'S Manual Download Page 87

Page: 87 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

As far as the seat belt extender on the

front passenger side is concerned, do not

fail to disconnect the extender from the
seat belt after the above operation in or-

der to activate the front passenger airbag

correctly when getting into the vehicle
next time.
When not in use, remove the extender

and store in the vehicle for future use.

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the lap and shoulder portions

of the belt and the seat belt extend-
er are not twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent you
from properly latching the tab and

buckle.

If the seat belt does not function

normally, immediately contact your

Toyota dealer. Do not use the seat
until the seat belt is fixed, because

it cannot protect an adult occupant

or your child from injury.

The driver and front passenger seat

belt pretensioners are designed to be

activated in response to a severe fron-

tal impact.

When the sensor detects a severe frontal

impact, the front seat belts are quickly
drawn back by the retractors so that the

belts snugly restrain the occupants.

The front passenger’s seat belt pretension-

er will not activate if no passenger is

detected in the front passenger seat by

the front passenger occupant classification

system. However, the front passenger’s

seat belt pretensioner may activate if lug-

gage is put on the seat, or the seat belt

is buckled up regardless of the presence

of an occupant in the seat. (As for the

front passenger occupant classification

system, see “—Front passenger occupant

classification system” on page 81 in this

Section.)
The seat belt pretensioners and SRS air-

bags may not operate together in all colli-
sions.

—Seat belt pretensioners

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands