Toyota 2004 HIGHLANDER Owner'S Manual Download Page 280

Page: 280 / 420

’04 HIGHLANDER_U (L/O 0308)

256

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

5. Remove the filter from the filter

case.

6. Inspect the filter on the surface.

If it is dirty, it should be replaced.

When installing the filter and filter

case, keep the arrow pointing up.

INFORMATION

The air filter should be installed prop-
erly in position. The use of air condi-

tioning with the air filter removed

may cause deteriorated dustproof per-
formance and then affect air condi-

tioning performance.

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands