Toyota 2004 HIGHLANDER Owner'S Manual Download Page 374

Page: 374 / 420

’04 HIGHLANDER_U (L/O 0308)

374

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

API service symbol

ILSAC certification mark

Oil identification marks
Either or both API registered marks are

added to some oil containers to help
you select the oil you should use.

The API Service Symbol is located any-
where on the outside of the container.
The top portion of the label shows the oil

quality by API (American Petroleum Insti-
tute) designations such as SL. The center

portion of the label shows the SAE viscos-

ity grade such as SAE 5W

−

30. “Energy

−

Conserving” shown in the lower portion,

indicates that the oil has fuel

−

saving ca-

pabilities.
The ILSAC (International Lubricant Stan-

dardization and Approval Committee) Certi-
fication Mark is displayed on the front of

the container.

To ensure excellent lubrication perfor-

mance for your engine, “Toyota Genuine
Motor Oil” is available, which has been

specifically tested and approved for all

Toyota engines.
Please contact your Toyota dealer for fur-

ther details about “Toyota Genuine Motor
Oil”.

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands