Toyota 2004 HIGHLANDER Owner'S Manual Download Page 71

Page: 71 / 420

’04 HIGHLANDER_U (L/O 0308)

2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)

BEFORE FOLDING DOWN THIRD SEAT
Make sure that the seat is clear of

people and luggage.

1. Stow the third seat seat belt buckles

as shown in the illustration.

NOTICE

The seat belt buckles must be stowed
before you fold the third seat.

2. To stow the seat belt, insert the tabs

into the slot as shown above. Make
sure the tabs are securely locked in

the slot.

NOTICE

The seat belt must be stowed before
you fold the seatback.

—Folding down third seat

Summary of Contents for 2004 HIGHLANDER





































































































































































































































































































































































































































Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands

Toyota 2004 HIGHLANDER, Owner'S Manual

Search results

Summary of Contents for 2004 HIGHLANDER

Reviews:

Related manuals for 2004 HIGHLANDER

Brands by name

Popular brands